Conference Program
Nov. 13 (Tue)
| 13th Nov. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Room A | Room B | Room C | Room D | |||||
| 8:00 | Registration | |||||||
| 9:00 | Opening ceremony | |||||||
| 9:10 | Plenary speech I @ Room A-D "MONOZUKURI" in next Generation, and Machine Tools and its Related Technologies Prof. Shinji Shimizu (Sophia University) |
|||||||
| 9:50 | Plenary speech II @ Room A-D CMP Technology; Past, Present and Future Prof. Haedo Jeong (Pusan National University) |
|||||||
| 10:30 | Coffee break | |||||||
| 11:00 | ||||||||
| A-1-1 | Assembly sequence planning for control panel with flexible wiring components Atsuko Enomoto, Noriaki Yamamoto, Yoshio Yamamura, Yoshio Sugawara |
B-1-1 | Visualization of Thickness of 3D Object Using Reversed Distance Field Masahiro Uenoyama, Toshiki Hirogaki, Eiichi Aoyama |
C-3-1 | Mathematical Modeling and Simulation Techniques for Dynamic Behavior of Articulated Robot Daichi OKAMOTO, Daiki MEKATA, Ryuta SATO, Keiichi SHIRASE, Shigeto MIZUURA, Yuya ITO |
B-6-1 | Basic Study on Laser Additive Processing for Nanostructures Based on Optical Trapping Potential Masahiro Hayashi, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi |
|
| 11:20 | A-1-2 | Visualization of Thickness of 3D Object Using Reversed Distance Field
Shinnosuke Naganuma, Masatomo Inui, Nobuyuki Umezu |
B-1-2 | Estimation of machining accuracy under constant feed speed vector at milling point with a five axis controlled machining center Kazuki Yoshikawa, Takamaru Suzuki, Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami |
C-3-2 | Improvement of geometrical accuracy of industrial robots by automatized parameter estimation Matthias Reuss, Georg Ulbrich |
B-6-2 | Effects of Concave Shape on Absorption Rate and Molten Volume in Micro-welding of Copper by Pulsed Nd:YAG Laser Kazuki Hamada, Martin Maina, Reiki Inoue, Yasuhiro Okamoto, Akira Okada, Norio Nishi, Shin-ichi Nakashiba, Tomokazu Sakagawa |
| 11:40 | A-1-3 | Proposal of an Operation Planning System by Case-Based Reasoning Using Machining Feature Information
Takeshi Igarashi, Tetsuya Asano, Keiichi Nakamoto |
B-1-3 | Proposition of a new gear cutting method using by the taper endmill
Hisanobu TERAI, Teruyuki ASAO, Ryoichi YAGAMI |
C-3-3 | Non-Uniform Sampling Rate Digital Controller Based on Delta Form Tatsu Aoki |
B-6-3 | Evaluation of groove machining characteristics of CFRP with fiber laser based on covariance structure analysis
Hayato Yoshioka, Yunfei Ji, Hidenori Shinno, Yuji Nishikawa, Atsushi Mori |
| 12:00 | Lunch | B-6-4 | Laser Recovery of Grinding Damage in the Edge and Notch of a Single-crystal Silicon Wafer Keiichiro Niitsu, Yu Tayama, Taketoshi Kato, Jiwang Yan |
|||||
| 12:20 | Lunch | |||||||
| 13:00 | ||||||||
| A-1-4 | Investigation of Motion Accuracy of Machine Tools with an Idling Reduction System at a Feed Drive
Tokiya Ozaki, Toshiki Hirogaki, Eiichi Aoyama |
B-1-4 | Experimental Investigations on Micro-end-milling of Hardened Die Steel Taichiro Ukawa, Keiji Ogawa, Takumi Imada, Haruki Kino, Heisaburo Nakagawa, Hitomi Kojima |
C-3-4 | Smart Hydraulic System for Driving Robot Arm Tatsuya Hayashi, Hiroaki Seki, Tokuo Tsuji, Masatoshi Hikizu |
|||
| 13:20 | A-1-5 | Detection of Sphere Colliding Step Shape in Automobile Parts Shun Nikaido, Masatomo Inui, Nobuyuki Umezu |
B-1-5 | Fundamental drilling characteristics of cemented carbide with diamond-coated carbide drill Masato Okada, Ryosuke Shida, Hidehito Watanabe, Takuya Miura, Masaaki Otsu |
C-3-5 | State recognition in branch pipes and distance estimation for a pipe traveling robot Ryuya Ito, Daisuke Harada, Masato Mizukami, Naohiko Hanajima, Yoshinori Fujihira |
A-3-2 | Improving the Stiffness of Hydrostatic Bearings Using Multilayer Perceptron Wei-Chen Kao, Yi-Feng Chang, Yong-Yuan Yang, Yung-Chih Tseng, Cheng-Kuo Sung |
| 13:40 | A-1-6 | Creating Digital Twin of Processed Surface for Industry 4.0
Angkush Kumar Ghosh, AMM Sharif Ullah, Akihiko Kubo |
B-1-6 | The influence of tool eccentric error on the surface roughness of gear teeth in power skiving
Zongwei Ren, Zhenglong Fang, Go Kobayashi, Toru Kizaki, Tsukasa Nishikawa, Junshi Kugo, Eiji Nabata, Naohiko Sugita |
C-3-6 | Study on friction driven gyroscopic generator with arbitrary vibration.
Aya Watanabe, Yasuhisa Ikeda, Hiroshi Hosaka |
F-1-1 | Temperature Measurement of Burnishing process by Electro-conductive Diamond tool Hidetake Tanaka, Hayate Tanaka |
| 14:00 | A-1-7 | Productivity Improvement of Smart Factory by Innovative IoT Platform Masako Sudo, Hideki Aoyama |
B-1-7 | New observation on the chip formation in two-dimensional cutting of iron-based amorphous foil
Zhenglong Fang, Keisuke Nagato, Naohiko Sugita, Masayuki Nakao |
C-3-7 | Estimation of transport route shape for taxi type AGVs based on network Voronoi diagrams
Kensuke Kobayashi, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa |
F-1-2 | Development of in-situ heat treatment by turning center equipped with a line-focused laser beam unit YOHEI SHINKAI, MASAKI KONDO, TOSHIKI HIROGAKI, EIICHI AOYAMA |
| 14:20 | A-1-8 | Suggestion of Three Dimensional Display Device using Voxel Cubes Kaoru Mitsuhashi |
B-1-8 | An Investigation on Machining Performance of Vibration Assisted Turning
Jhy-Cherng TSAI, Po-Hsiu KO, Sih-Cheng JHOU, Wei-Lin JIANG |
C-3-8 | Automation of Soil Mixing by an Industrial Robot Natsuki Ito, Naoki Asakawa, Keigo Takasugi, Hiromi Nojiri, Sayaka Matumura |
F-1-3 | Droplet Evaporation and Watermark Formation on Si-Wafers with Various Film Ayako YANO, Kenji Amagai, Kazuki Matsumoto, Hirokuni HIYAMA, Akira FUKUNAGA, Shohei SHIMA, Naoyuki HANDA |
| 14:40 | A-1-9 | Development of Coherent GD&T Verification Manner for Automatic Product Validation
Osamu Sato, Kazuya Matsuzaki, Makoto Abbe, Toshiyuki Takatsuji |
B-1-9 | Influence of built-up layer on the wear mechanisms of uncoated and coated carbide tools during dry cutting of Inconel 718 Xiaoqi SONG, Yukio TAKAHASHI, Tohru IHARA |
C-3-9 | Evaluation of cutting efficiency of ultrasonic dental scaler
Masahiro Kubota, Masaya Takasaki, Daisuke Yamaguchi, Masayuki Hara, Yuji Ishino, Takeshi Mizuno |
F-1-4 | Effect of corner radius of textured-DLC coatings on wear resistance of stainless plate under severe conditions
Yuya Eyama, Takuya Osawa, Hiroshi Yamamoto, Shinji Tanaka, Masao Kikuchi, Hiroki Akaska, Naoto Ohtake |
| 15:00 | Coffee break | |||||||
| 15:20 | ||||||||
| B-2-1 | Grinding characteristics of Ni-Co-Cr-Mo Alloy with the coolant supplying from inner side of grinding wheel Shinji Horiuchi, Hiroyuki Sasahara |
B-1-10 | Fundamental Study on Chip Removal Mechanisms of Polycrystalline Diamond Ball-End Mills Peerapong Kasuriya, Takeshi Watanabe, Takashi Goto, Shun-taro Sato, Masahiko Jin |
C-2-1 | Impulse-driven Capsule for Medical Inspection Hiroyuki Ichiki, Kenta Asai, Shotaro Watanabe, Takahiro Ito, Sunao Murakami |
D-1-1 | Fundamental study on entangled photon probe for quantum optical metrology Fumitake Yano, Yasuhiro Mizutani, Yasuhiro Takaya |
|
| 15:40 | B-2-2 | Wear Behavior of Fine Diamond Abrasive Grains on Electroplated Polishing Pad Ryunosuke Sato, Takuya Akiyama |
B-1-11 | A Machine Tuning Method for High Precision Gear Skiving Mariko Sasaki, Makoto Fujishima, Tatsuhiko Kuriya, Atsushi Tada |
C-2-2 | Microneedle array for medical application
TAICHI HANADA, Takahiro ITO, Tomohiro HIKIMA, Sunao MURAKAMI, Hirotada TSUBAKI, Masaya HARA, Yasunori TASHIRO, Masaaki MATSUO |
D-1-2 | Traceable atomic force microscope for surface roughness calibration in sub-nanometer order Ichiko Misumi, Ryosuke Kizu, Akiko Hirai, Satoshi Gonda |
| 16:00 | B-2-3 | Investigation on high temperature grinding of mono-crystal sapphire wafer
Nao Sugano, Libo Zhou, Jun Shimizu, Hirotaka Ojima, Ken Ishibashi, Mituru Kaneyasu |
B-1-12 | Turning of Difficult-to-machine Materials with High Pressure Coolant Akira Hosokawa, Yuki Nomura, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto |
E-1-1 | Training System for Manual Lathe Operation without Instructors Nobuyoshi Hashimoto |
D-1-3 | Basic Development of Three Dimensional Encoder for Highly-accurate Positioning
hideaki tamiya, yoshiyuki mitera, kayoko taniguchi, hideki aoyama, kazuo yamazaki |
| 16:20 | B-2-4 | Wear Behavior of cBN Grain Cutting Edges in Deep Grinding
Masakazu Fujimoto, Susumu Ohishi |
B-1-13 | Influence of machining conditions in turning-burnishing process on the finished surface Shota Kojima, Wataru Takahashi, Hiroyuki Sasahara |
D-1-4 | Single-shot measurement of 3D surface profiles using wide field view laser microscope Isami Nitta, Takuya Sato, Yosuke Tsukiyama |
||
| 16:40 | B-2-5 | Improvement of shape accuracy in internal grinding using a slender grinding wheel Takashi Onishi, Kuya Nishi, Sakakura Moriaki, Yusuke Nakabayashi, Kazuhito Ohashi |
B-1-14 | Evaluation of the Machined Surface Characteristics on Reverse Finishing of 0.45%C Steel Yusuke Nishio, Masatoshi Usui, Hiroyuki Sasahara |
C-1-1 | Vibration reduction effect of counter-balance feed drive with right and left ball screw and guideline for its design
Yuya KAWAZOE, Toshiki HIROGAKI, Eiichi AOYAMA |
D-1-5 | Theoretical investigation of a femtosecond laser chromatic confocal probe with fiber illumination and pinhole illumination CHONG CHEN, Xiuguo CHEN, Yuki Shimizu, Hiraku Matsukuma, Wei Gao |
| 17:00 | B-2-6 | Three-dimensional small glass hole evaluation using replica method and multiple characteristics optimization by stepwise procedure
Akira Ogawa, Takenori Takahashi, Eiichi Higuchi |
B-1-15 | Experimental Study on Ultraprecision Cutting Characteristics of PMMA Shino Araki, Chun-Wei Liu, Kao-Der Chang, Jiwang Yan |
C-1-2 | Study on Noncontact three-dimensional measurement based on CAD Tatsuki Otsubo, Takanori Yazawa, Reiko Yamada, Kazuki Izumi |
D-1-6 | Feasibility study on a compact encoder system employing a micro thermal sensor head for precision positioning Yuki Shimizu, Yuki Matsuno, Ayaka Ishida, Hiraku Matsukuma, Wei Gao |
| 17:20 | B-2-7 | Development of A Post-Processing System of Resin Organ Models by Utilizing 3-Axis CNC Abrasive Machining
Norikazu Suzuki, Takayuki Ohba, Eiji Shamoto, Masahiro Oda, Kensaku Mori, Yoshimi Takeuchi |
B-1-16 | Strategy to Reduce Surface Location Error Considering the Static and Dynamic Displacements in End Milling Process Takehiro Hayasaka, Ryo Kimura, Shunsuke Fujimaki, Hongjin Jung, Eiji Shamoto |
C-1-3 | Improvement of Simultaneous 5-axis Controlled Machining Accuracy by Modified CL-data
Kiichi MORISHITA, Ryuta SATO, Keiichi SHIRASE, Takayuki IWASAKI, Masanobu HASEGAWA, Akira SAITO |
D-1-7 | Fast evaluation of variable line spacing gratings by using a Fieazu Interferometer
Xin Xiong, Xiuguo Chen, Yuki Shimizu, Hiraku Matsukuma, Wei Gao |
| 17:40 | B-2-8 | Magnetic Polishing For Magnetic Materials Using a Permanent Magnet Tool in a Machining Center
Nan Ling, Lei Ma, Wei Wu, Eiichi AOYAMA, Toshiki HIROGAKI |
B-1-17 | The relationship between surface roughness and cutting conditions for an inclined cutting of a filleted end mill
Ryo Kato, Hirohisa Narita |
C-1-4 | Investigation of the influence of fluid properties on bearing characteristics in hydrostatic bearing using water Hiroshi Sawano, Takumi Iwasa, Yoshinori Nishibeppu, Taku Miyoshi, Syu Katono |
D-1-8 | A novel nano particle characterizing method using nano particle micro array Terutake Hayashi, Syuhei Kurokawa, Zhu Jiaqing |
Nov. 14 (Wed)
| 14th Nov. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Room A | Room B | Room C | Room D | |||||
| 8:20 | B-4-1 | Finite Element Simulation of Surface Deformation in Precision Backside Patterned Texturing
Syed Adnan Ahmed, Joeng Hoon Ko, Swee Yeo |
B-5-1 | Dissimilar metal deposition for a high purity deposited surface using TIG - MIG hybrid welding Hideaki Nagamatsu, Jun Kinoshita, Hiroyuki Sasahara |
C-1-5 | Measurement of Dynamic Characteristic of NC Lathe During Turning Process
Tetsuya Fukuda, Keigo Takasugi, Naoki Asakawa |
D-2-1 | Investigation of Oil Adsorption and Air Filter Properties of PP Nonwoven Fabric Manufactured by Modified Melt Blowing Method Wei WU, Kenichi URABE, Toshiki HIROGAKI, Eiichi AOYAMA, Hiroyoshi SOTA |
| 8:40 | B-4-2 | Numerically Controlled Plasma Chemical Vaporization Machining Using Array-Type Electrode toward High-Throughput Deterministic Machining Ken Nishida, Shinya Okayama, Satoshi Matsuyama, Kazuto Yamauchi, Yasuhisa Sano |
B-5-2 | Optimization of the Additive Fabrication Conditions on Laser Metal-wire Deposition using Copper Alloy Takenao Tsurumaki, Yusuke Yamamoto, Keiichi Noriyama, Hiroyuki Sasahara |
C-1-6 | Proposal of Contact-less Dynamic Spindle Testing by Eddy Current Brake Kan Yamamoto, Keigo Takasugi, Naoki Asakawa |
D-2-2 | Investigation of Production of Nanofiber Nonwoven Fabric and Its Thermal Properties Kenichi URABE, Wei WU, Toshiki HIROGAKI, Eiichi AOYAMA, Hiroyoshi SOTA |
| 9:00 | B-4-3 | Formation process of grain boundary steps on ultra-precision cut surfaces of polycrystalline copper and zinc
Tsukasa Miyagawa, Tatsuya Tokuyama, Hiroshi Kawakami, Takeshi Tanaka, Yoshihiro Sato |
B-5-3 | Accurate 3D Printing by Evaluation of Modeling Error Using Hole Plate Mariko Kajima, Makoto Abe, Toshiyuki Takatsuji |
C-1-7 | A Study on the Burnishing Process Using NACS-Turning Yoshiya Isozaki, Keigo Takasugi, Naohiko Suzuki, Yoshiyuki Kaneko, Naoki Asakawa, Yoshitaka Morimoto |
D-2-3 | Error elimination of the angles detected by a rotating gyro Tatsuya Kume, Masanori Satoh, Tsuyoshi Suwada, Kazuro Furukawa, Eiki Okuyama |
| 9:20 | B-4-4 | CMP Characteristics of Quartz Glass Substrate by Aggregated Colloidal Ceria Slurry
Kaito Wakamatsu, Syuhei Kurokawa, Terutake Hayashi |
B-5-4 | On the Additive Manufacturing of Hokkaido-Ainu Motifs - TASHI, AMM Sharif Ullah, Akihiko KUBO, Michiko WATANABE |
C-1-8 | Measurement of thermal influence on 2D geometric errors of linear axes
Masahiro Shimoike, Soichi Ibaraki, Naruhiro Irino |
D-2-4 | Lifetime improvement of release-agent-free replica mold with high hardness and anti-fouling properties in ultraviolet nanoimprint lithography
JUNYA KAWAUCHI, JUNPEI TUCHIYA, SHIN HIWASA, JUN TANIGUCHI |
| 9:40 | B-4-5 | Influence of crossing angle on surface roughness and removal rate in super-finishing with a five-axis closed-link compact robot and fine diamond stone
buyan li, wei wu, toshiki hirogaki, eiichi aoyama |
B-5-5 | Finite Element Method for Composite Material Structures fabricated by AM KOKI JIMBO, Toshitake Tateno |
C-1-9 | Performance evaluation of positioning control system in light weight rotary stage with CFRP
Makoto Kato, Yasuhiro Kakinuma, Yuki Shirakawa, Kazunori Iijima, Yasusuke Iwashita |
D-2-5 | Improvement in transfer speed for moth-eye structure in RTR-UV-NIL
MASAKI ONO, JUN TANIGUCHI, SHIN HIWASA |
| 10:00 | Coffee break | |||||||
| 10:20 | F-2-1 | Cross-sectional measurement of laser damage in sapphire using confocal micro Raman spectrometer Teppei Onuki, Kazuki Kamoshida, Takeyuki Yamamoto, Hirotaka Ojima, Jun Shimizu, Libo Zhou |
B-5-6 | Identification of Dynamic Process Response in DED-type Additive Manufacturing Process and Its Application to Process Optimization Masahiro Ueda, David Carter, Kazuo Yamazaki, Yasuhiro Kakinuma |
C-1-10 | Motion Control in Precision Machine Tools
Jan Braasch |
D-1-9 | Scattered Field Analysis for Diameter Measurement of Tapered Optical Fiber Under Counter-propagating-beam Illumination Zheng Zhao, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi |
| 10:40 | F-2-2 | Three-dimensional deformation measurement of real contact area using laser micro scope
YUKI JOROBATA, DAISUKE KONO |
B-5-7 | Evaluation for mechanical strength and element distribution in a composite material of Inconel 625 and SUS316L produced in direct energy deposition Iori Unotoro, Ryo Koike, Yasuhiro Kakinuma, Yohei Oda |
C-1-11 | Improvement of Reversing Motion of an NC Moving Table by Friction Force Compensation Tatsuya Mukai, Yoshitaka Morimoto, Akio Hayashi |
D-1-10 | Analysing tapered fiber-microsphere coupling for diameter measurement of microsphere using whispering gallery mode resonance Yumeki Kobayashi, Zheng Zhao, Bohuai Chu, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi |
| 11:00 | F-2-3 | Running-in Behavior of Mechanically Microtextured Metal Surfacesin Dry Sliding
Tomotaka Nakayama, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto, Kouta Watanabe |
B-5-8 | Powder Waste Reduction in Directed Energy Deposition based on Fluid Analysis of k-ε Model
Shiho Takemura, Ryo Koike, Yasuhiro Kakinuma, Yohei Sato, Yohei Oda |
C-1-12 | Vibration Suppression Mechanism of a Passive Pivot Support in Thin-Wall Milling
Hiroaki Nagai, Nils Knorr, Iwao Yamaji, Atsushi Matsubara |
D-1-11 | Investigation of super-resolution microscopy by use of a nano-patterned substrate
Ryoko Sakuma, Hiromasa Kume, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi |
| 11:20 | F-2-4 | Fabrication of Nano-structured Surfaces and Their Effect on Bacterial Attachment DEEPAK PATIL, Sivanandam Aravindan, Mishi Wasson, Vivekanandan Perumal, Paruchuri Rao |
B-5-9 | Effect of surface roughness on the pressure drop and heat transfer of cooling channels produced by Powder-Bed-Fusion using Laser-Beam-Melting (PBF-LBM) Olena Flys, Mathias Johansson, Seyed Hosseini, Johan Berglund, Sepehr Hatami, Christos Oikonomou, Bengt-Göran Rosén |
C-1-13 | A new machine tool configuration with multiple spindles
Kengo Kawahara, Soichi Ibaraki |
D-1-12 | Absolute measurement of optical path length of the three-dimensional nanoprofiler based on the normal vector tracing method by tandem white light interferometer
Jungmin Kang, Takao Kitayama, Ryo Kizaki, Yui Toyoshi, Agustinus Winarno, Kiyoshi Takamasu, Kazuya Yamamura, Katsuyoshi Endo |
| 11:40 | F-2-5 | Effect of Thermal Annealing on Titanium Thin Film Deposited on Silicon Substrate DEEPAK PATIL, Sivanandam Aravindan, Paruchuri Rao |
B-5-10 | Void Reduction and Hardness Enhancement by applying Remelting Process in Directed Energy Deposition
Taro Misawa, Ryo Koike, Yasuhiro Kakinuma, Yohei Oda |
C-1-14 | Performance of CAD/CAM Post Processor on S-shaped Machining Test for 5-axis Machining Center Yukitoshi Ihara, Koichiro Takubo, Tatsuo Nakai, Ryuta Sato |
D-1-13 | Diameter Measurement of Reference Sphere using Rotation of Sphere
Ryota Kudo, Yohan Kondo, Youichi Bitou |
| 12:00 | F-2-6 | Production of ZnO regular microstructure by hydrothermal process with controlled nucleation aiming at efficient gas sensor Daiki Funakawa, Nobuyuki Moronuki |
B-5-11 | Precise correction of Wolter mirror mandrel for neutron microscope by numerically controlled plasma chemical vaporization machining Shohei Arakawa, Kentaro Kawai, Kenta Arima, Dai Yamazaki, Ryuji Maruyama, Hirotoshi Hayashida, Kazuhiko Soyama, Kazuya Yamamura |
C-1-15 | Evaluation of Torsional Strength of Carbon Fiber Reinforced Plastic Shaft for Development of Machine Tool Spindle Soichiro Mizuno, Daisuke Kono, Iwao Yamaji, Toshiyuki Muraki, Masamitsu Nakaminami, Atsushi Matsubara |
D-1-14 | Sparse deconvolution non-fluorescent imaging with structured illumination microscopy
Hirohito Kondo, Shin Usuki, Kenjiro Miura |
| 12:20 | F-2-7 | Fabrication of Functional Subwavelength Structured Surface Using Evanescent Wave Interference Lithography
Shuzo Masui, Masaki Michihata, Kiyoshi Takamasu, Toshihiko Shibanuma, Hironao Tanaka, Satoru Takahashi |
B-5-12 | Micro Texturing by Electrochemical Machining with Short Voltage Pulses
TAISHI TAKAHASHI, TOMOHIRO KOYANO, AKIRA HOSOKAWA, TATSUAKI FURUMOTO, YOHEI HASHIMOTO |
C-1-16 | Development of Long Life Ball Screw using Material with High Retained Austenite Amount γR for High-Load Drive
Masahiro Ueda, Naruaki Abe, Naoki Kawata, Hideyuki Hidaka |
D-1-15 | Development of a microprobe using a detection of surface interaction force Yusuke Shima, So Ito, Kazuhide Kamiya, Kimihisa Matsumoto |
| 12:40 | Lunch | |||||||
| 13:40 | Plenary speech III AI and Robotics Prof. Junichi Tsujii (AIST) |
|||||||
| 14:20 | Plenary speech IV Motion Control in Precision Machine Tools - A Discussion of the Benefits of Advanced Position Feedback Dr. Jan Braasch (HEIDENHAIN GmbH) |
|||||||
| 15:00 | Coffee break | |||||||
| 15:10 | F-2-8 | Machining Performance of Textured Diamond Cutting Tool Fabricated by Focused Ion Beam and Heat Treatment Noritaka Kawasegi, Takumi Kawashima, Noboru Morita, Kazuhito Nishimura, Makoto Yamaguchi, Noboru Takano |
B-5-13 | Study on Influence of Tool Electrode Material on Discharge Delay Time in EDM
Jiajing Tang, Xiaodong Yang, Masanori Kunieda |
B-1-18 | Capability of Diamond Coated Ball-End Tools in Milling of Sintered Tungsten Carbide HARUHIKO SUWA, Soushi Sakamoto, Tetsuo Samukawa |
D-1-16 | In-situ Measurement of the Refractive Index and Geometrical Length for Determining the Location of Optical Part Using a Tandem Low-coherence Interferometry
Agustinus Winarno, Satoru Takahashi, Hirokazu Matsumoto, Kiyoshi Takamasu |
| 15:30 | F-2-9 | Development of Localized Compressive Hydrostatic Pressure-assisted Cutting using Rolling Element
Jun Shimizu, Hiroto Ashino, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou, Kazuki Komatsuzaki |
B-5-14 | Estimation of Heat Affected Zone by EDM on SUS 430
Yuan-Jen Chang, Fu-Chen Huang, Chao-Ching Ho, Jin-Chen Hsu, Chia-Lung Kuo |
B-1-19 | Analysis of Cutting Conditions by Response Surface Methodolgy of Nitriding Spheroidal Graphite Cast Iron Taturo Hasegawa, Takuya Deguchi, Hirohisa Narita |
D-1-17 | Development of a laser tracker using absolute length measurement technique by an optical comb pulsed interferometer
SHUSEI MASUDA, TOMOHIKO TAKAMURA, SATORU TAKAHASHI, HIROKAZU MATSUMOTO, KIYOSHI TAKAMASU |
| 15:50 | F-2-10 | Micro Fabrication of Au Thin-film by Transfer-printing with Atomic Diffusion Bonding Arata Kaneko, Taira Katayama, Atsushi Kawahata, Shun Morishita |
B-5-15 | In-process simulation of wire electrode displacement in WEDM using optical sensor
Kazuki Shibata, Masanori Kunieda |
B-1-20 | Evaluation of Adhesion in Drilling of Aluminum Alloy
Satoshi Arakawa, Shoichi Tamura, Takashi Matsumura |
D-1-18 | Self-calibration method of nanometer profile measurement on large aspheric optical surface
Tomohiko Takamura, Yohan Kondo, Youichi Bitou, Satoru Takahashi, Kiyoshi Takamasu |
| 16:10 | F-2-11 | Nanoembossing for efficient fabrication of metallic nanostructured elements Tomoyuki Aoyagi, Sivanandom Aravindan, Paruchuri Rao, Motoki Terano, Masahiko Yoshino |
B-5-16 | Clarification on the behavior of bubble in micro EDM drilling Guodong Li, Wataru Natsu, Zuyuan Yu |
B-1-21 | Cutting Process in Helical Milling of Aluminum alloy Nobuhiro Shimizu, Shoichi Tamura, Takashi Matsumura |
A-3-3 | Accuracy Compensation of Imperfectly Magnetized Scale by Free-pitch MR Sensor Hsiang-Yun Chang Chien, Mu-Po Chang, Tsu-Lien Chou, Cheng-Kuo Sung |
| 18:00 | Conference dinner | |||||||
Nov. 15 (Thu)
| 15th Nov. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Room A | Room B | Room C | Room D | |||||
| 9:00 | H-1-1 | Fabrication of Polygonal Cross-Section Microneedle and its Pain Evaluation Kentaro Miyachi, Ganesh Mani, Kazuyoshi Tsuchiya |
B-7-1 | High-precision press molding of hybrid infrared lens substrates by using a new polymer without coupling agent content. Hibiki Ishide, Jiwang Yan |
||||
| 9:20 | H-1-2 | Development Vibration Assisted Microneedle pH Sensor and Puncture for Cell Soichi Doi, Ganesh Mani, Kazuyoshi Tsuchiya |
B-1-22 | Dynamic Characteristics in Drilling with Change in Tool-Workpiece Contact Masakazu Kuwano, Shoichi Tamura, Takashi Matsumura |
G-1-1 | Microfluidic Device for Capturing Circulating Tumor Cells
Tatsuya Yoshizawa, Yuki JINGU, Masanori Hayase |
B-7-2 | Examination of ABS Product Warpage Molded by Aluminum Alloy Mold with Rapid Heating and Cooling Mold Temperature Controlling System Makoto Nikawa, Yuta Matsui, Hiroki Shibata, Minoru Yamashita |
| 9:40 | H-1-3 | Valve-actuator integrated liquid junction Ag/AgCl reference electrode for long life miniature pH sensor
Shogo Higuchi, Seiichi Takamatsu, Toshihiro Itoh |
B-1-23 | Observation of Built-up-edges at the End of Chips
Katsuhiko Sekiya, Ryutaro Tanaka, Keiji Yamada |
G-1-2 | Targets Development of a Precise Positioner with Differential Micro Flows Jean-Charles Pelletier, Hisayuki Aoyama, Yuuka Irie, Chisato Kanamori, Nadine Piat |
B-7-3 | Relationship between surface texture and joining strength in blast-assisted metal-polymer direct joining
Gota Suzuki, Fuminobu Kimura, Shotaro Kadoya, Eiji Yamaguchi, Yusuke Kajihara |
| 10:00 | H-1-4 | Mechanical-Electrical Properties of Organic Electrochemical Transistor Atsushi Kanno, Toshihiro Itoh, Seiichi Takamatsu |
B-1-24 | Crack generation during voltage application to gold-doped borosilicate glass slide Hirofumi KAWAMURA, Souta MATSUSAKA, Hirofumi HIDAI, Akira CHIBA, Noboru MORITA |
G-1-3 | Proposal of Cell Manipulation Device using Vibration and Micro Shapes Miyabi Hagiwara, Akira Kakuta, Hiromichi Nakadate, Susumu Tarao |
B-7-4 | Bending collapse behavior of adhesive-bonded tubular structure under impact Minoru Yamashita, Makoto Nikawa |
| 10:20 | Coffee break | |||||||
| 10:40 | A-4-1 | Visualization Features for the Analysis of Machining Operations on CNC Machines Denys Plakhotnik, Masako Sudo, Sven Odendahl, Marc Stautner, Yavuz Murtezaoglu |
B-1-25 | Observation of wheel scribing behavior using Scanning Electron Microscope Masahiro Saito, Kentaro Imai, Yuichiro Matsumoto, Souta Matsusaka, Hirofumi Hidai, Akira Chiba, Noboru Morita |
G-1-4 | Study on removal characteristics of soft tissue by Er:YAG laser irradiation Hidekazu Okudomi, Tatsuaki Furumoto, Yohei Hashimoto, Tomohiro Koyano, Akira Hosokawa |
D-5-1 | Metal 3D Printing based on Direct Laser Welding of Fine Metal Wires Cheng-Hsin Chuang, Ching-Chia Chen, Ji-Rong Chen, Yi-Chin Chou, Tsung-Yuan Kuo, Muhammad Omar Shaikh |
| 11:00 | A-4-2 | New Calculation Method of Cutter Locations on Accurate Offset Surface based on Parallel Processing with GPU Hiromu Kitahara, Jun'ichi Kaneko, Masahiro Ajisaka, Takeyuki Abe, Kenichiro Horio |
B-1-26 | A Study of Generation Mechanism of Fracture Surface in the Wheel Cleaving
Kentaro IMAI, Masahiro SAITO, Yuichiro MATSUMOTO, Sota MATSUSAKA, Hirofumi HIDAI, Akira CHIBA, Noboru MORITA |
G-1-5 | Hierarchical Ag/AgIO3 Thin Films: A Novel and Promising Reference Electrode Material for Microneedle pH Sensors Ganesh Kumar Mani, Dhivya Ponnusamy, Yutaka Yasoda, Kazuyoshi Tsuchiya |
D-5-2 | 3D Asymmetry Analysis of Human’s Back Surface for Early Screening of Idiopathic Scoliosis
Satoshi Kanai, Hideki Sudo, Terufumi Kokabu, Hiroshi Nagaeda, Takayuki Hayashi, Hajime Ohta |
| 11:20 | A-4-3 | Development of CAM System for Turning Using Haptic Device
Yutaro Horikawa, Koichi Morishige |
B-1-27 | Tool chipping detection based on spindle motor torque distortion in end-milling
Kazuki Kaneko, Isamu Nishida, Ryuta Sato, Keiichi Shirase |
G-1-6 | Observation of mosquito's labium and its application to microneedle
Shunki Yamamoto, Masahiro Yamada, Tomokazu Takahashi, Masato Suzuki, Seiji Aoyagi, Ryota Hosomi, Kenji Fukunaga, Daisuke Uta, Tomonori Takazawa |
D-5-3 | Segmentation and LOD Model Generation of Buildings from MMS Point Clouds of Urban Area Takuya Kanayama, Toshihide Mineushiro, Hiroaki Date, Satoshi Kanai |
| 11:40 | A-4-4 | On-machine contact scanning of freeform surfaces to produce an adaptive cutting path John Ould, Alex Kane |
G-1-7 | Fundamental Study on Thermal Imprint of Microneedle Tip under Atmospheric Pressure Shingo Terashima, Chikako Tatsukawa, Masato Suzuki, Tomokazu Takahashi, Seiji Aoyagi |
D-5-4 | Optimal Laser Scan Planning of Terrestrial Laser Scanner for As-built Modeling of HVAC Systems using Integer Programming
Eisuke Wakisaka, Satoshi Kanai, Hiroaki Date |
||
| 12:00 | Lunch | |||||||
| 13:00 | A-4-5 | Proposal of a Determination Method of Cutting Sequence Based on Optimal Workpiece Shapes During a Machining Operation Hitoshi Kushino, Maho Kumanotani, Keiichi Nakamoto |
B-5-17 | Influence of machining conditions on electrolytic corrosion in micro EDM using deionized water Sowa Sakozono, Wataru Natsu |
C-4-1 | Design, Realization, and Decoupling Control of a Single-Axis Cascaded Stage Based on Compliant Mechanisms and Rubber Bearings
Yu-Ching Li, Kuo-Shen Chen |
D-5-5 | Detection of Deflection of Large-Scale Structures Using Dense Point-cloud Yuki Shinozaki, Nanami Mizuguchi, Yoshitaka Midorikawa, Hiroshi Masuda |
| 13:20 | A-4-6 | Lossy compression with Daubechies wavelet transform for Z-Map Models
Nobuyuki Umezu, Masatomo Inui |
B-5-18 | Improvement of Shape Accuracy in Multi-wire EDM Slicing of Semiconductor Ingot Takayuki Ikeda, Yasuhiro Okamoto, Haruya Kurihara, Akira Okada, Masataka Kido |
C-4-2 | Robust Filtering of Machining Tool-paths for Accurate and Rapid Motion Generation
Burak Sencer, Yuki Yamada, Yasuhiro Kakinuma |
D-5-6 | A Statistic Method for Estimating the Effective Spot Shape of Terrestrial Laser Scanners Ichiro Tanaka, Hiroshi Masuda |
| 13:40 | A-4-7 | Fabrication of Strength-Enhanced Eccentric Shaped Ball End-Mill Hiroyuki Wakayama, Noriyuki Imaizumi, Katsuji Sakai, Masatoshi Sakurai, Yoshimi Takeuchi |
B-5-19 | Electrical Discharge Machining of Micro-rods Using High Electric Resistance Electrodes and Piezoelectric Positioning Stage Ryuki Hayashi, Tomohiro Koyano, Akira Hosokawa, Tatsuaki Furumoto, Yohei Hashimoto |
C-4-3 | Application of Machine Learning to Tuning High-dimensional Feedforward Parameters for Suppressing Low Frequency Vibration in Machine Tools
Ryotaro Tsuneki, Naoto Sonoda, Satoshi Ikai, Yasusuke Iwashita |
D-5-7 | Efficient Non-Rigid Registration for Point-Clouds of Pole-Like Objects
Hiroki Matsumoto, Yoshitaka Midorikawa, Hiroshi Masuda |
| 14:00 | A-4-8 | Deep Hole Machining with High Dimension Accuracy by Small Diameter Tools Naoki Asakawa, Yoshimi Takeuchi |
B-5-20 | Developing a desktop micro-EDM for tungsten carbide high-aspect ratio micro holes fabrication
Tzu-Wei Huang, Mark Y. Y. Wu, Dong-Yea Sheu |
C-4-4 | A Multi-Stereo Camera System for Measurement of Position and Orientation of a Precise Positioning Stage
Shihou Kou, Dai Nishida, Akio Mizutani, Hisao Kikuta |
D-5-8 | Machine Guidance for Snow-Removal Vehicles and Curb Detection from Mobile Mapping Data Daisuke Kubo, Kiitiro Ishikawa, Yoshiharu Amano |
| 14:20 | A-4-9 | Improvement Design and 3D Printing of Zirconia Dental Implant under Dynamic Loadings Yung-Chang Cheng, Cho-Pei Jiang |
B-5-21 | Study of Crack Formation in EDM Process on V4E tool steel Jieshing Lo, Wei-Hsuan Hsu, Chyn-Shu Deng, Min-Yow Hsieh |
C-4-5 | Simple controller design for high speed and precision motion of a ball screw mechanism Kaiji Sato |
D-4-1 | Automatic On-Machine Identification of Cutting Tool Setting Parameters Using Vision and Displacement Sensor
Achmad Rifai, Ryo Fukuda, Hideki Aoyama |
| 14:40 | B-5-22 | Attempt of Three-dimensional Shape Generation with Electrolyte Suction Tool
Atsushi Sato, Wataru Natsu |
D-4-2 | Quantifying precision limits on polarization sensing Nathan Hagen |
||||
| 15:00 | Coffee break | |||||||
| 15:20 | A-2-1 | Recognition of transient environmental sounds based on features of the spectrogram Shota Okubo, Ken Sasaki, Gong Zhihao, Kenta Fujita, Jun Shoda |
B-5-23 | Research on transfer characteristics of electrochemical machining for micro-hole with complicated shape
Yosuke Hanamura, Wataru Natsu |
B-3-1 | Development of efficient fabrication process of metallic nanostructures for optical functional surfaces
Hao Shen, Masahiko Yoshino, Motoki Terano |
D-3-1 | Non-Contact High Speed Measurements of the Processed-Product Shape Using New Optical Comb Interferometer Hirokazu Matsumoto, Kiyoshi Takamasu |
| 15:40 | A-2-2 | Development of a System to Monitor Dementia Patients in a Hospital Using Depth Sensor Mikio FUJIO, Shiho KOIKE, Kazuma IWATA |
B-5-24 | Research on influence of current density distribution in scanning electrochemical machining of titanium alloy Saori Hizume, Wataru Natsu |
B-3-2 | Drilling of Microholes in Alumina using Ultrasmall-Diameter Diamond Grinding Tools Ryota Honda, Akio Hayashi, Mari Takeuchi, Kai Egashira, Keishi Yamaguchi, Minoru Ota |
D-3-2 | Basic Study on Cell-in-Microfactory System with Localized Light Control Seiko Furuya, Shuzo Masui, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi |
| 16:00 | A-2-3 | Data structure for life cycle simulation in consideration of part agents promoting the reuse of mechanical parts
Tsuramichi Tanigawa, Takeru Nagahata, Naoki Masuda, Hiroyuki Hiraoka |
B-5-25 | Influence of suction pressure and flow direction on ECM characteristics with suction tool Guixian Liu, Wataru Natsu |
B-3-3 | Microstructural component effects on the machining & deformantion mechanism of polycrystalline copper Pengyue Zhao, Yongbo Guo, Tianyue Ma, Qingshun Bai, Feihu Zhang, Yang He, Yongda Yan |
D-3-3 | Investigation of engineering applications of passive THz-SNOM Tatsuya Kaneoya, Kuan-Ting Lin, Yusuke Kajihara |
| 16:20 | A-3-1 | Data mining from tool catalog introducing machine learning method
Taishi Sakuma, Kotaro Yamada, Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama |
B-5-26 | ECM of sintered carbide with a monopolar-pulse power supply
Sicong wang, Akihiro Goto, Atsushi Nakata, Kunio Hayakawa, Katsuhiko Sakai |
B-3-4 | A Study on Tool Setting Errors Compensation by Means of Non-contact Measurement on an Ultraprecision Machine Tool Meng Xu, Ren Kitakawa, Keiichi Nakamoto, Yoshimi Takeuchi |
D-3-4 | Observation of buckling phenomena using 3D-speckle interferometer Masaki Tsuji, Yasuhiko Arai |
| 16:40 | A-3-2 | Paper is presented in Room D at 13:20 on Nov. 13 | B-5-27 | Electrochemical Machining of Micropins using Self-Drilled Holes
Yuzuru Okuno, Keita Nakayama, Kai Egashira, Keishi Yamaguchi, Minoru Ota |
B-3-5 | Precision polishing techniques for stainless steel SUS310S molding die used in glass forming technology “slumping method” Jumpei Kinoshita, Akira Shinozaki, Takeshi Sakamoto, Koji Akashi, Yoshiharu Namba |
D-3-5 | Simulation of Imaged Fringe Pattern Generated with Three Laser Beams Utilized for Out-of-plane Displacement Measurement Kohhei Kawahara, Motoharu Fujigaki, Yuta Goto |
| 17:00 | A-3-3 | Paper is presented in Room D at 16:10 on Nov. 14 | ||||||